Legacy Suspension System Parts

Superpro Front Wishbone Rear Bush replacement kit

The standard Subaru bushes are prone to perishing, splitting & contribute to front end body movement when cornering, accelerating & braking even when new due to the large & soft design. This kit is designed to replace both front wishbone rear bushes & greatly reduce the standard body movement while also improving the steering response. Superpro products are tested by us for suitability on the Legacy range & are provided with a lifetime warranty so you can be assured of quality. Available as a standard replacement set with no castor change, with single offset again with no castor change to counteract a slight pull to the left that can be felt on many UK roads or with double offset that is for performance settings with increase castor.

 

  

Legacy 3.0, 2.0GTB, 2.0GT, 2.0, 2.5 BP/BL 2003-2008 3.0NA   
£92.81 + VAT  
£111.37 including VAT

 

Superpro Front Anti Roll Bar Kits

As most Legacy owners know the body roll on the performance models can sometimes reduce the pleasure of a spirited drive & can be noticeable when compared to the WRX models. However as most Legacy owners prefer to retain the comfort of the vehicle & do not want to lower or harden the dampers with a full coilover suspension kit we offer a solution with the Superpro front anti roll bar kits. This will reduce & control body roll without lowering & giving a less comfortable ride. As with all Superpro products a lifetime warranty is provided with the components. These roll bars are supplied with poly bushes & are compatible with the standard front links but are also adjustable & the Superpro adjustable link kit is required to use the adjustable settings. The standard front bar size on a 2006 BP5 Legacy GTB is 21mm & the rear is 19mm, a 24mm front bar is recommended to feel a difference.

 

 

BP/BL Legacy 2003-2008 Front 24mm Adjustable Bar Kit  
£138.50 + VAT
£166.20 including VAT

Optional front adjustable ARB link kit £TBA

 

Superpro ARB Mount Bush Kits

Designed as a direct replacement of the original Subaru rubber part that suffers from wear & movement. Made from more polyurethane that is far more durable & supplied with a lifetime warranty. Various size kits are available but as a guide 03-08 GT/GTB models should use 21mm front & 19mm rear.

 

Front kit with both bushes supplied
£20.58 + VAT
£24.70 including VAT

Rear kit with both bushes supplied
£20.58 + VAT
£24.70 including VAT

 

BC Racing Coilover BR Series Type RA

The BR series coilovers use a large 44mm diameter piston in a 53mm diameter damper body to maximise oil capacity.  As the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristics of the unit. 

BC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body.  This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance

Legacy  £707.50+VAT

All prices listed above exclude VAT, delivery & fitting charges. Please contact us if you would like a quote for fitting or delivery.